Rochester 8280 Series "Marine" Flat Dial Vertical Fuel or Water Level Gauge 26"

Description

Rochester 8280 Series "Marine" Flat Dial Vertical Fuel or Water Level Gauge 26"
Identical to 8680 series flat dial vertical fuel level gauges, but constructed of corrosion free brass
Application
The brass and stainless-steel construction of the 8200 Series spiral gauge makes it suitable for use in marine applications and in measuring levels of water, oil or fuel. They are also used in a variety of construction and maintenance vehicles such as road sweepers and water spray trucks.
General Information & Features
The Model 8240 spiral gauge incorporates a strong nickel-plated Alnico magnet. The magnet is capable of driving a TwinSite® sender (not included) that sends an electrical signal to a remote receiver and provides a direct, fractional reading.
All 8200 Series spiral gauges have a 1 1?2" MNPT tank connection
(2" adapter available)
, and are suitable for tank pressures up to 25 PSIG [1,7 Bar] maximum. They are designed for top mounting only in tanks up to 36" [914 mm] deep and some models are UL listed for flammable liquids.
General Specifications*
Mounting
Designed for top-mounting only.
Accuracy
Accuracy depends upon proper gauge sizing. Direct read dials ±8%, TwinSite dials ±12%. Accuracy may be less depending upon tank shape. Accuracy may be less near full and empty. Accuracy may be less if tank is not level. This gauge is not to be used for filling. All accuracy estimates are expressed as a percent of full scale.
Temperature
Standard operating range is -40°F to 158°F, -40°C to 70°C.
Humidity
Exposed portion is fully suitable for marine applications.
Shock
Suitable for marine applications.
Vibration
Suitable for marine applications.
Power
0.5 watts maximum for TwinSite® versions.
Tank Pressure
0 to 25 PSIG [0 - 1,7 Bar] maximum.
Approval
Direct indicating gauge. Available UL listed for flammable liquids. Some models UL recognized for marine service.
Materials of Construction*
Head, Support Rod, & Centershaft
Brass.
Tie Plate, Guide, & Bearing Pin
Stainless steel.
Float
Nitrile rubber.
Drive Magnet
Plated alnico.
Standard Dial
Polycarbonate, hermetically sealed.
Side-View Dial
Aluminum with polycarbonate crystal, hermetically sealed.
Click
Installation Guide